Press Line for production of KVH / BSH / GLT beams

InquiryInquiry form
Press Line for production of KVH / BSH / GLT Press Line front view

It is designated for the production of laminated wood beams (KVH, BSH, GLT) in lengths of 4 to 12 m. The Line consist of the jet glue applicator, the positioning conveyor with dynamic back stop, the stacking conveyor, the press itself and the cross roller conveyor.

Description:

The run of the line is fully automated and for the operation there are necessary only two people - on infeed and on outfeed. The operator inserts lamellas on the infeed roller conveyor so that the driven rollers in the glue applicator feed it under nozzles in order to apply the glue...

PUR Glue Applicator Beam assemblying

From the glue applicator the lamellas are moved by conveyor with a dynamic back stop. The conveyor positions the lamellas into the desired position in order to assemble the required (graded) beams / prisms. The lamella is then pushed onto a stacking conveyor.

Beam assemblying Beam transport

After finishing the press cycle (duration depends on the adhesive), glued beams are moved onto the cross roller conveyor and then removed from the press area, where the operator takes them to further processing.

Beam in press KVH / BSH / GLT beam

After finishing the press cycle (duration depends on the adhesive), the glued beams are moved on the cross roller conveyor and then removed from the press area, where the operator can take them to further processing.