Stellite Saw Blades - DT series

Saw Blades

Stellite Saw Blades - DT series

Stellite Saw Blades – DT series of various dimensions from high quality Swedish steel and Stellite, for your thin cutting frame saw. Thin Cutting Saw Blades are used for thin cutting both kinds of wood – hard and soft. The geometry of blade edge is adjusted individually according to the use of a Stellite Saw Blade. In average the Stellite Saw Blades can be sharpened 8 – 10 times and it depends on required kerf as well on the frame saw & sharpening machine operator. Depending on the load of the blade, we recommend to adjust the blade pre-tension by rolling. You can find other details about the geometry and use of stellite saw blades in the chapter “More About Stellite Saw Blades”.

INQUIRY FORM
DESCRIPTION DOCUMENTATION

DT = Direct Tooth (common tooth)

Features of DT series blades:

  • Thin Saw Kerf from 1.05 mm
  • High quality Swedish steel and Stellite
  • Best performance on NEVA machines
  • Available as well for other vendor machines
  • Simple sharpening

* newly we offer the Stellite Saw Blades also on the base strip 45 mm wide

 

Standard Stelite Saw Blades Specification NEVA
A
(length)

(width)

(body)
Saw kerf
(pitch)
Max.
cut. height
380 40 - 0,6 1,05 13 80 mm
380 40 45 0,7 1,15 13 80 mm
380 40 - 0,8 1,25 13 80 mm
420 40 45 0,7 1,15 13 120 mm
420 40 - 0,8 1,25 13 120 mm
420 40 45 0,9 1,4 13 120 mm
455 40 45 0,9 1,4 13 150 mm
505 40 45 0,9 1,4 15 200 mm
520 40 45 0,9 1,4 15 220 mm
555 40 45 0,9 1,4 15 250 mm
Stelite Hogger/Scraper Blades Specification NEVA
380 36,5 2,11 2,6 13 80 mm
420 36,5 2,11 2,6 13 120 mm
455 36,5 2,11 2,6 13 150 mm
505 36,5 2,4 2,9 15 200 mm
520 36,5 2,4 2,9 15 220 mm
555 36,5 2,4 2,9 15 250 mm

* other Stellite Saw Blades dimensions available according to your specification or drawing

« BACK TO CATEGORY
PARTNERS
Ogden Group DudrTools RfsProtech