Stellite Saw Blades - ST series

Saw Blades

Stellite Saw Blades - ST series

Stellite Saw Blades – ST series of various dimensions from high quality Swedish steel and Stellite, for your thin cutting frame saw. Thin Cutting Saw Blades are used for thin cutting both kinds of wood – hard and soft. The geometry of blade edge is adjusted individually according to the use of a Stellite Saw Blade.

The feature of these Stellite Saw Blades is an „alternately set“ tooth. The designation ST comes from the English term Set Tooth, i.e. alternately on the left and right side set tooth. In this patented saw blade design, the stellited tooth is alternately under-grinded.

INQUIRY FORM
DESCRIPTION DOCUMENTATION

In average the Stellite Saw Blades ST can be sharpened 8 – 12 times and it depends on required kerf as well on the frame saw & sharpening machine operator. Depending on the load of the blade, we recommend to adjust the blade pre-tension by rolling. You can find other details about the geometry and use of stellite saw blades in the chapter “More About Stellite Saw Blades”.

Features of ST series blades:

  • ST = Set Tooth for low friction, low heat build-up, low noise, less sawdust
  • Higher yield of tools up to 20% - more re-sharpening achieved compared to regular blades
  • Thin Saw Kerf from 1,05 mm
  • High quality Swedish steel and Stellite
  • Best performance on NEVA machines
  • Available as well for other vendor machines
  • Simple sharpening

Stellite Saw Blades - ST series - Dimensions

Standard Stellite Saw Blades Specification NEVA
A
(length)

(width)

(body)
Saw kerf
(pitch)
Max.
cut. height
380 40 0,6 1,05 13 80 mm
380 40 0,7 1,15 13 80 mm
380 40 0,8 1,25 13 80 mm
420 40 0,7 1,15 13 120 mm
420 40 0,8 1,25 13 120 mm
420 40 0,9 1,4 13 120 mm
455 40 0,9 1,4 13 150 mm
505 40 0,9 1,4 15 200 mm
520 40 0,9 1,4 15 220 mm
555 40 0,9 1,4 15 250 mm
Stellite Hogger/Scraper Blades Specification NEVA
380 36,5 2,11 2,6 13 80 mm
420 36,5 2,11 2,6 13 120 mm
455 36,5 2,11 2,6 13 150 mm
505 36,5 2,4 2,9 15 200 mm
520 36,5 2,4 2,9 15 220 mm
555 36,5 2,4 2,9 15 250 mm

* other Stellite Saw Blades dimensions available according to your specification or drawing

« BACK TO CATEGORY
PARTNERS
Ogden Group RfsProtech